{"title":"Outdoor PoE Equipment","description":"\u003cp\u003eExplore outdoor PoE extenders, injectors and surge protectors for network installations. Compare port layouts, supported link speeds, power ratings and connection requirements to select equipment for your setup.\u003c\/p\u003e","products":[{"product_id":"outdoor-poe-extender-1-in-1-out","title":"Outdoor IP67 PoE Extender - 1 In \/ 1 Out, 100M to 10G","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003eoutdoor PoE extender\u003c\/strong\u003e provides a sealed 1-input\/1-output connection point for extending Ethernet and Power over Ethernet between compatible network devices. The compact aluminum enclosure, mounting tabs, status indicators, and cable-gland layout are suited to outdoor camera, wireless bridge, monitoring, and solar-powered network installations where a protected inline connection is needed.\u003c\/p\u003e\n\u003ch2\u003eSpeed Options\u003c\/h2\u003e\n\u003cp\u003eSelect the network version that matches the complete link: 100M, 1000M, 2500M, or 10000M. Switches, injectors, cabling, connectors, and powered devices must all support the chosen data rate. The 1-in\/1-out format keeps the network path simple while moving the connection point closer to the remote device.\u003c\/p\u003e\n\u003ch2\u003eElectrical and Network Details\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePort Layout\u003c\/th\u003e\n\u003ctd\u003e1 PoE input, 1 PoE output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed Choices\u003c\/th\u003e\n\u003ctd\u003e100M, 1G, 2.5G, or 10G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnclosure Marking\u003c\/th\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Options\u003c\/th\u003e\n\u003ctd\u003ePassive 37–57 V or standards-based PoE, depending on selected model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Power Label\u003c\/th\u003e\n\u003ctd\u003eUp to 120 W on applicable versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003ePower mode and capacity are model-specific. Confirm the voltage, pinout, PoE standard, cable category, and powered-device demand for the exact speed option before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0685\/7582\/2024\/files\/1_In-1_Out_100M_to_10G_PoE_Extender_Size.jpg?v=1789455292\" alt=\"1 In-1 Out 100M to 10G PoE Extender Size\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation and Use Notes\u003c\/h2\u003e\n\u003cp\u003eMount the housing securely, route both network cables through the supplied glands, and tighten the seals around compatible cable diameters. Keep connector terminations clean and dry during assembly. This device extends an existing compatible PoE link; it does not replace the upstream injector or PoE switch. For 2.5G and 10G operation, use cabling and endpoint hardware rated for the intended speed. Plan enough service clearance to reopen the glands, inspect the RJ45 terminations, and read the indicator lights after the unit is mounted.\u003c\/p\u003e","brand":"LinkSolar","offers":[{"title":"100M","offer_id":45211070267592,"sku":"ACC-PROPOE11-100M","price":89.27,"currency_code":"USD","in_stock":true},{"title":"1000M","offer_id":45211070300360,"sku":"ACC-PROPOE11-1000M","price":102.7,"currency_code":"USD","in_stock":true},{"title":"2500M","offer_id":45211070365896,"sku":"ACC-PROPOE11-2500M","price":138.54,"currency_code":"USD","in_stock":true},{"title":"10000M","offer_id":45211070333128,"sku":"ACC-PROPOE11-10000M","price":195.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/7582\/2024\/files\/outdoor-poe-extender-overview-01.png?v=1789031210"},{"product_id":"outdoor-1-to-2-poe-extender","title":"Outdoor IP67 1-to-2 PoE Extender - 100M to 2.5G","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003e1-to-2 PoE extender\u003c\/strong\u003e takes one compatible PoE network input and provides two output connections in a compact outdoor enclosure. It is intended for installations that need to place two network devices beyond a protected branching point, including cameras, access points, monitoring equipment, and solar-powered communications hardware.\u003c\/p\u003e\n\u003ch2\u003eOutput Layout\u003c\/h2\u003e\n\u003cp\u003eThe housing separates one input side from two output ports and includes cable glands, mounting ears, and visible link and power indicators. The two-output layout can reduce the need for an additional enclosure at the branch point. Available product views show the connector faces, mounting base, sealed rear housing, and assembled gland arrangement.\u003c\/p\u003e\n\u003ch2\u003eSpeed and PoE Options\u003c\/h2\u003e\n\u003cp\u003eChoose 100M, 1000M, or 2500M to match the slowest component in the complete network path. Product labeling identifies passive 37–57 V and standards-based PoE configurations, with up to 120 W shown for applicable models. These ratings must not be treated as interchangeable across every variant.\u003c\/p\u003e\n\u003ch2\u003eDetails \u0026amp; Specs\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePort Layout\u003c\/th\u003e\n\u003ctd\u003e1 PoE input, 2 PoE outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed Choices\u003c\/th\u003e\n\u003ctd\u003e100M, 1G, or 2.5G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutdoor Rating\u003c\/th\u003e\n\u003ctd\u003eIP67 shown on the product material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Power Label\u003c\/th\u003e\n\u003ctd\u003eUp to 120 W on applicable versions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eConfirm the selected model, upstream PoE budget, output-device demand, cable category, and pinout before wiring. Divide the available upstream power across both outputs and allow for cable loss. Mount the unit securely and tighten each gland around a compatible cable. This extender does not create additional upstream power; it distributes the compatible input available to the two connected devices. Leave access for indicator checks and future connector service.\u003c\/p\u003e\n\u003ch2\u003eBuyer questions\u003c\/h2\u003e\n\u003ch3\u003eWhich speed should I choose?\u003c\/h3\u003e\n\u003cp\u003e100M, 1000M or 2500M — match the slowest component in the complete network path: upstream equipment, cabling and the two connected endpoints.\u003c\/p\u003e\n\u003ch3\u003ePassive or standards-based PoE?\u003c\/h3\u003e\n\u003cp\u003eProduct labeling identifies passive 37–57 V and standards-based PoE configurations depending on the model, and the ratings must not be treated as interchangeable across variants. Confirm the selected model before wiring.\u003c\/p\u003e\n\u003ch3\u003eDoes the 120 W figure apply to every unit?\u003c\/h3\u003e\n\u003cp\u003eNo — up to 120 W is shown on applicable versions only. The extender does not create additional upstream power; it divides the compatible input available across the two outputs, with cable loss to allow for.\u003c\/p\u003e\n\u003ch3\u003eWhat is on the housing?\u003c\/h3\u003e\n\u003cp\u003eOne input side separated from two output ports, cable glands, mounting ears, and visible link and power indicators, in a compact outdoor enclosure with an IP67 marking on the product material.\u003c\/p\u003e\n\u003cp\u003eLinkSolar supplies solar accessories to B2B buyers; ships from China.\u003c\/p\u003e\n","brand":"LinkSolar","offers":[{"title":"100M","offer_id":45211070398664,"sku":"ACC-PROPOE12-100M","price":115.71,"currency_code":"USD","in_stock":true},{"title":"1000M","offer_id":45211070431432,"sku":"ACC-PROPOE12-1000M","price":140.19,"currency_code":"USD","in_stock":true},{"title":"2500M","offer_id":45211070464200,"sku":"ACC-PROPOE12-2500M","price":161.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/7582\/2024\/files\/outdoor-two-output-poe-extender-01.png?v=1789031334"},{"product_id":"outdoor-poe-surge-protector-10g","title":"IP67 Outdoor PoE Surge Protector - 2.5G \/ 10G","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003eoutdoor PoE surge protector\u003c\/strong\u003e adds a grounded protection stage to a compatible Ethernet and Power over Ethernet link. The inline unit uses a compact aluminum enclosure with cable glands, mounting tabs, and a grounding lead connection for outdoor network equipment, camera links, access points, and monitoring systems.\u003c\/p\u003e\n\u003ch2\u003eProtection Architecture\u003c\/h2\u003e\n\u003cp\u003eThe documented circuit combines a gas discharge tube with TVS protection and addresses both common-mode and differential-mode surge paths. Correct grounding is essential: the supplied grounding lead must be bonded to the site protection system using an installation method appropriate for the equipment and local requirements.\u003c\/p\u003e\n\u003ch2\u003eNetwork and Electrical Specs\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel Choices\u003c\/th\u003e\n\u003ctd\u003e2.5G PoE SPD or 10G PoE SPD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Voltage\u003c\/th\u003e\n\u003ctd\u003e48 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Continuous Voltage\u003c\/th\u003e\n\u003ctd\u003e57 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Discharge Current\u003c\/th\u003e\n\u003ctd\u003e5 kA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Discharge Current\u003c\/th\u003e\n\u003ctd\u003e10 kA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage Protection Level (Up)\u003c\/th\u003e\n\u003ctd\u003e200 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLine-to-Line Limiting Voltage\u003c\/th\u003e\n\u003ctd\u003e≤150 V under the documented test waveforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eEnclosure and Installation\u003c\/h2\u003e\n\u003cp\u003eThe IP67-rated die-cast aluminum housing uses nylon cable joints specified for 4–8 mm cable diameter. Documented dimensions are 160 × 43 × 43 mm, and the listed operating-temperature range is −40 to 85 °C. Install the protector close to the equipment being protected, maintain a short grounding path, and keep both cable glands correctly tightened.\u003c\/p\u003e\n\u003ch2\u003eModel Selection\u003c\/h2\u003e\n\u003cp\u003eChoose the 2.5G or 10G version to match the intended network. Confirm cable category, connector wiring, PoE voltage, data rate, and the grounding plan for the complete link. Inspect the grounding connection and cable seals as part of routine site maintenance. The protector reduces surge exposure but cannot guarantee protection from every lightning or electrical event.\u003c\/p\u003e","brand":"LinkSolar","offers":[{"title":"2.5G POE SPD","offer_id":45211070562504,"sku":"ACC-PROPOESPD-25G","price":78.85,"currency_code":"USD","in_stock":true},{"title":"10G POE SPD","offer_id":45211070595272,"sku":"ACC-PROPOESPD-10G","price":87.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/7582\/2024\/files\/outdoor-poe-surge-protector-01.webp?v=1789031510"},{"product_id":"4-port-outdoor-poe-extender","title":"4-Port Outdoor IP67 PoE Extender - 100M \/ 1G","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003e4-port outdoor PoE extender\u003c\/strong\u003e provides one compatible PoE input and four PoE outputs in a sealed metal enclosure. It creates a centralized outdoor connection point for cameras, wireless devices, sensors, and solar-powered monitoring equipment while keeping the connector layout visible and serviceable.\u003c\/p\u003e\n\u003ch2\u003eChoose a Network Speed\u003c\/h2\u003e\n\u003cp\u003eTwo variants are available. The Gigabit model supports 10\/100\/1000 Mbps, while the Fast Ethernet model supports 10\/100 Mbps. Select the version that matches the upstream switch or injector, cabling, and every connected endpoint. A faster extender does not increase the speed of a slower device or cable segment.\u003c\/p\u003e\n\u003ch2\u003ePort and Power Layout\u003c\/h2\u003e\n\u003cp\u003eProduct labeling shows one BT 90 W PoE input and four PoE output ports, with a maximum 90 W output budget. That figure is a total equipment limit rather than 90 W per output. Account for cable loss and divide the available power across all connected devices.\u003c\/p\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePoE Layout\u003c\/th\u003e\n\u003ctd\u003e1 input, 4 outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGigabit Variant\u003c\/th\u003e\n\u003ctd\u003e10\/100\/1000 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFast Ethernet Variant\u003c\/th\u003e\n\u003ctd\u003e10\/100 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Label\u003c\/th\u003e\n\u003ctd\u003eBT 90 W PoE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum Output Label\u003c\/th\u003e\n\u003ctd\u003e90 W total\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnclosure Marking\u003c\/th\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eConfirm the upstream PoE mode, total power budget, cable category, and endpoint requirements before connection. Mount the enclosure securely, keep the ports clean during assembly, and tighten every gland around a compatible cable. Unused openings should remain properly sealed for the intended environment.\u003c\/p\u003e\n\u003ch2\u003eDetails \u0026amp; Specs\u003c\/h2\u003e\n\u003cp\u003eThe front face provides four labeled RJ45 outputs, while the input side carries the incoming PoE connection. Status LEDs show power and link activity for practical troubleshooting. This unit extends and distributes a compatible PoE link; it does not supply power without an appropriate upstream source.\u003c\/p\u003e\n\u003ch2\u003eBuyer questions\u003c\/h2\u003e\n\u003ch3\u003eIs the 90 W rating per output port?\u003c\/h3\u003e\n\u003cp\u003eNo. The product labeling shows one BT 90 W PoE input and a maximum 90 W output budget in total across the four outputs — not 90 W per port. Account for cable loss and divide the available power across all connected devices.\u003c\/p\u003e\n\u003ch3\u003eGigabit or Fast Ethernet?\u003c\/h3\u003e\n\u003cp\u003eTwo variants: the Gigabit model supports 10\/100\/1000 Mbps and the Fast Ethernet model 10\/100 Mbps. Match the version to the upstream switch or injector, the cabling and every connected endpoint — a faster extender does not increase the speed of a slower device or cable segment.\u003c\/p\u003e\n\u003ch3\u003eDoes it need an upstream PoE source?\u003c\/h3\u003e\n\u003cp\u003eYes. The unit extends and distributes a compatible PoE link; it does not supply power without an appropriate upstream source.\u003c\/p\u003e\n\u003ch3\u003eWhat does the IP67 enclosure require at installation?\u003c\/h3\u003e\n\u003cp\u003eA sealed metal enclosure with an IP67 marking. Mount it securely, keep the ports clean during assembly, tighten every gland around a compatible cable, and leave unused openings properly sealed for the intended environment.\u003c\/p\u003e\n\u003ch3\u003eWhat are the status LEDs for?\u003c\/h3\u003e\n\u003cp\u003ePower and link activity on the front face, next to four labeled RJ45 outputs — practical troubleshooting without opening the enclosure.\u003c\/p\u003e\n\u003cp\u003eLinkSolar supplies solar accessories to B2B buyers; ships from China.\u003c\/p\u003e\n","brand":"LinkSolar","offers":[{"title":"gigabit","offer_id":45211070628040,"sku":"ACC-PROPOE4-1G","price":182.62,"currency_code":"USD","in_stock":true},{"title":"fast Ethernet","offer_id":45211070660808,"sku":"ACC-PROPOE4-100M","price":168.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/7582\/2024\/files\/outdoor-four-port-poe-extender-01.webp?v=1789031604"},{"product_id":"outdoor-ac-dc-poe-injector","title":"Outdoor AC\/DC PoE Injector - 30W \/ 60W, IP67","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003eAC\/DC outdoor PoE injector\u003c\/strong\u003e combines one Ethernet data input, one PoE output, and dedicated AC and DC power connections in a compact IP67-marked enclosure. The current 30W and 60W choices support outdoor network layouts where power must be added near a camera, access point, bridge, or monitoring device.\u003c\/p\u003e\n\u003ch2\u003ePower Input Choices\u003c\/h2\u003e\n\u003cp\u003eThe front panel identifies a 100–240V AC, 50\/60Hz input and a 44–57V DC input. Choose the input method and power variant that match the site power source and the connected device. Treat the AC and DC connections as alternative installation inputs unless the final system design explicitly confirms another arrangement.\u003c\/p\u003e\n\u003ch2\u003ePort and Model Details\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eNetwork Interface\u003c\/th\u003e\n\u003ctd\u003e1 data input, 1 PoE output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eData Rate\u003c\/th\u003e\n\u003ctd\u003e10\/100\/1000 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower Options\u003c\/th\u003e\n\u003ctd\u003e30W model or 60W model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAC Input Marking\u003c\/th\u003e\n\u003ctd\u003e100–240V AC, 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDC Input Marking\u003c\/th\u003e\n\u003ctd\u003e44–57V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnclosure Marking\u003c\/th\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eConfirm the selected power option, input voltage, PoE requirements, cable category, and total device demand before connection. Mount the housing securely, keep the ports clean during assembly, and tighten each cable gland around a compatible cable. AC wiring and site grounding should be completed by a qualified installer in accordance with the applicable electrical requirements.\u003c\/p\u003e","brand":"LinkSolar","offers":[{"title":"30w model","offer_id":45211070693576,"sku":"ACC-PROPOEACDC-30W","price":129.22,"currency_code":"USD","in_stock":true},{"title":"60w model","offer_id":45211070726344,"sku":"ACC-PROPOEACDC-60W","price":146.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/7582\/2024\/files\/ac-dc-outdoor-poe-injector-01.webp?v=1789441475"},{"product_id":"outdoor-10g-poe-injector-90w","title":"Outdoor 2.5G \/ 10G PoE Injector - 90W, IP67","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003e10G outdoor PoE injector\u003c\/strong\u003e adds power to one compatible Ethernet link through a sealed, single-output enclosure. Four current configurations combine either 2.5G or 10G networking with a 48–57V DC or 12–57V DC input range, helping buyers match the injector to the complete network and power architecture.\u003c\/p\u003e\n\u003ch2\u003eSpeed and Input Selection\u003c\/h2\u003e\n\u003cp\u003eSelect 2.5G or 10G according to the slowest component in the link, including the switch, injector, cable, connector, and powered device. Then choose the DC input range that matches the planned supply. The 48–57V and 12–57V versions are separate options and should not be treated as interchangeable.\u003c\/p\u003e\n\u003ch2\u003ePoE Output Details\u003c\/h2\u003e\n\u003cp\u003eThe available models provide one data input and one PoE output with a maximum 90W output label. IEEE 802.3af, 802.3at, and 802.3bt modes are identified for the active PoE output. Actual usable power still depends on the selected input version, source capacity, cable loss, and connected-device demand.\u003c\/p\u003e\n\u003ch2\u003eDetails \u0026amp; Specs\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; height: 137.157px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 46.1864%; height: 19.5938px;\"\u003eNetwork Choices\u003c\/th\u003e\n\u003ctd style=\"width: 50.9818%; height: 19.5938px;\"\u003e2.5G or 10G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 46.1864%; height: 19.5938px;\"\u003eDC Input Choices\u003c\/th\u003e\n\u003ctd style=\"width: 50.9818%; height: 19.5938px;\"\u003e48–57V DC or 12–57V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 46.1864%; height: 19.5938px;\"\u003eMaximum PoE Output\u003c\/th\u003e\n\u003ctd style=\"width: 50.9818%; height: 19.5938px;\"\u003e90W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 46.1864%; height: 19.5938px;\"\u003ePort Layout\u003c\/th\u003e\n\u003ctd style=\"width: 50.9818%; height: 19.5938px;\"\u003e1 data input, 1 PoE output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 46.1864%; height: 19.5938px;\"\u003ePoE Modes\u003c\/th\u003e\n\u003ctd style=\"width: 50.9818%; height: 19.5938px;\"\u003eIEEE 802.3af\/at\/bt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 46.1864%; height: 19.5938px;\"\u003eEnclosure Marking\u003c\/th\u003e\n\u003ctd style=\"width: 50.9818%; height: 19.5938px;\"\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 46.1864%; height: 19.5938px;\"\u003eSize\u003c\/th\u003e\n\u003ctd style=\"width: 50.9818%; height: 19.5938px;\"\u003e170*77*43mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eDeployment Notes\u003c\/h2\u003e\n\u003cp\u003eVerify polarity, source capacity, PoE mode, cable category, grounding approach, and endpoint requirements before installation. Keep the RJ45 connections clean, tighten the glands, and leave enough clearance to inspect the status indicators. The 90W figure is an equipment limit, not a guarantee that every input condition can deliver the full output.\u003c\/p\u003e","brand":"LinkSolar","offers":[{"title":"2.5G 48-57Vdc in","offer_id":45211070759112,"sku":"ACC-PROPOE90-25G-4857V","price":106.84,"currency_code":"USD","in_stock":true},{"title":"2.5G 12-57Vdc in","offer_id":45211070791880,"sku":"ACC-PROPOE90-25G-1257V","price":168.94,"currency_code":"USD","in_stock":true},{"title":"10G 48-57Vdc in","offer_id":45211070824648,"sku":"ACC-PROPOE90-10G-4857V","price":150.87,"currency_code":"USD","in_stock":true},{"title":"10G 12-57Vdc in","offer_id":45211070857416,"sku":"ACC-PROPOE90-10G-1257V","price":195.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/7582\/2024\/files\/90w-outdoor-poe-injector-kit-01.webp?v=1789441579"}],"url":"https:\/\/linksolar.net\/collections\/outdoor-poe-equipment.oembed","provider":"LinkSolar","version":"1.0","type":"link"}