2W Solar Panel with Battery Clips, 12V, 110 × 136mm
2W Solar Panel with Battery Clips, 12V, 110 × 136mm ...è stato ordinato al fornitore e verrà spedito non appena sarà di nuovo disponibile.
Caratteristiche
Caratteristiche
2W Solar Panel with Battery Clips, 12V, 110 × 136mm
2W Solar Panel with Battery Clips, 12V, 110 × 136mm ...è stato ordinato al fornitore e verrà spedito non appena sarà di nuovo disponibile.
Product Overview
The 2W solar panel with battery clips provides a 110 × 136mm polycrystalline board and a red-and-black clip connection. Its 12V working output and compact cell area suit a correctly controlled small solar circuit. Rear wiring runs from the junction box to the clips, with the cell face left clear for sunlight collection.
Key Features
- 2W peak panel rating at 12V working output
- 110 × 136mm epoxy-covered module
- Red and black battery clips included
- Rear junction box routes the attached lead
- Approximately 72g panel weight
Details & Specs
| Rated panel power | 2W |
|---|---|
| Working voltage | 12V |
| Dimensions | 110 × 136mm |
| Cell / surface | Epoxy-covered polycrystalline silicon |
| Connection | Attached red and black battery clips |
| Output current | 0–166mA |
| Open-circuit voltage | 13.5V |
| Short-circuit current | 180mA |
| Panel weight | Approximately 72g |
| Included | 1 solar panel with attached battery-clip lead |
Compatibility & Notes
Match working voltage and clip polarity to the circuit. Use a separate compatible charge-control circuit for rechargeable batteries; clips alone do not provide charging protection. Output depends on direct sunlight and load.
