5W PET Camera Solar Panel with DC 3.5 x 1.35mm Plug
Product Overview
This 5W camera solar panel pairs a PET-laminated monocrystalline surface with a DC 3.5 x 1.35mm barrel plug. Its approximately 3m lead delivers solar power to a compatible 5V camera input while allowing separate placement of the panel and camera.
Black and white housing options each include a rear mounting bracket. The panel measures 197 x 167 x 10mm and weighs approximately 245g, keeping the assembly compact for a small outdoor installation.
Best For
Suitable for cameras and other low-power devices expressly designed to accept a 5V solar charging source through a DC 3.5 x 1.35mm socket. Confirm the device's required polarity, input range and connector dimensions before choosing this panel. Camera-brand names alone do not establish compatibility.
Key Features
- PET lamination covers monocrystalline cells in a slim framed housing.
- A round DC plug provides a defined connection size for compatible charging sockets.
- The rear joint allows the panel angle to be set independently of the mounting base.
- A long attached cable and supplied screws and wall plugs support flexible mounting arrangements.
Details & Specs
| Power / working voltage | 5W / 5V |
|---|---|
| Working current | 0–1000mA |
| Short-circuit current | 1100mA |
| Cell material / module efficiency | Monocrystalline silicon / 21.8% |
| Surface | PET laminated |
| Connector | DC 3.5 x 1.35mm barrel plug |
| Lead length | Approximately 3m |
| Panel size | 197 x 167 x 10mm |
| Net / packaged weight | Approximately 245g / 392g |
| Box size | 220 x 180 x 45mm |
| Operating range | 0–50°C |
| Housing colors | Black or white |
Compatibility & Notes
Place the panel in direct sunlight and route the lead without pulling on the camera socket. Shading and changing weather reduce the power available; the panel is not a source of fixed continuous output.
Protect electrical connections from moisture. Use an appropriate charging circuit for battery projects rather than connecting bare cells directly. Check the chosen device's own solar charging and temperature instructions before installation.
