LinkSolar is a China-based B2B supplier of custom & OEM solar panels, solar cells and mounting hardware. Panels are manufactured to your drawing by partner production lines; we handle specification, samples, pre-shipment checks and export.
Start from a stock foldable, or brief a custom one
Three ways to start. Pick the one closest to your project:
- Buy a stock panel. The models in the table below are in the store now; order on the product page.
- Stock panel under your brand. Tell us which model and how it should be marked and packed.
- New design. Brief the wattage, fold pattern, ports and branding from scratch.
For options 2 and 3, send your brief through the quote form at the bottom of this page. MOQ depends on the product — ask us for the MOQ on your item; sample and production timing are confirmed with your quote. You can use a stock panel first to test charging behaviour and pack size with your users.
| Stock panel | Output | Folded size · weight | Built for |
|---|---|---|---|
| 11 W foldable charger | USB 5 V / 2.4 A | 245 × 158 × 1.5 mm · 198 g | Phones and power banks, hiking, emergency kits |
| 28 W, ETFE, 4 sections | Two USB ports | 20 × 15.2 cm · 540 g | USB devices on camping trips |
| 40 W, PET, 3 sections | Not listed; ask for the output configuration | 11.97 × 8.86 × 1.77 in · 1.1 kg | Camping, road trips |
| 80 W, ETFE, 8 sections | USB-C, USB-A; Vmp 19 V for power stations | 12.5 × 9.6 × 2.5 in · 2.67 kg | Power stations and small devices |
| 100 W, ETFE, 2 sections | MC4 cable with DC5521, Anderson, XT60, DC7909 ends | 58.42 × 53.34 cm · 3.8 kg | Power stations, camping and RV travel |
| 200 W, 6 sections | Output lead; working voltage 20 V | 460 × 415 × 75 mm · 4.8 kg | Power stations at a campsite or RV stop |
Questions product teams ask about custom foldable panels
Can you build a foldable solar charger under our brand?
Yes. You set the wattage, fold pattern (2-, 3-, 4-fold or suitcase), output ports and branding; the panel, fabric and mechanical parts are specified as one design. You get a written specification and a quotation, then samples for field testing before production.
Which outputs can one design combine?
USB-C PD, USB-A, regulated 12 V or 18 V DC for power stations, and MC4 for an external charge controller, with the panel voltage matched to your load. Before connecting any panel to a power station, compare the station's solar input limits with the panel's open-circuit voltage, not its wattage.
What wattage should a foldable kit be?
Around 20–40 W suits phone and power-bank kits; around 100 W suits small laptops, radios and overlanding; 200 W and above suits power-station bundles and 12 V systems. These are starting points: the design is sized to your devices and how small it has to pack.
More on choosing one: foldable solar charger guide · portable solar charger guide · portable solar panels.
How a custom order works
- Share the requirement. A drawing, an outline dimension, a target voltage, or just the device you need to power, plus the quantity you have in mind.
- Review the options. You get back a written specification (dimensions, Vmp, Imp, lamination, connector, tolerances) and a quotation at your quantity. Minimum order, sample and production timing are stated in that quotation for your design.
- Test a sample. Check fit and output in your own product before anything goes into production.
- Confirm, then checked before shipment. Every order is checked against the confirmed specification before it ships.
- Export. Goods ship from China with one proforma invoice and one shipment. Email is the fastest way to reach us: [email protected].
