0.6W 3V Epoxy Mini Solar Panel with 15cm Leads, 60 × 75mm
0.6W 3V Epoxy Mini Solar Panel with 15cm Leads, 60 × 75mm est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Caractéristiques
Caractéristiques
0.6W 3V Epoxy Mini Solar Panel with 15cm Leads, 60 × 75mm
0.6W 3V Epoxy Mini Solar Panel with 15cm Leads, 60 × 75mm est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Product Overview
This 0.6W 3V epoxy mini solar panel is a small polycrystalline module with attached red and black leads. At 60 × 75mm, it can be integrated into suitably designed low-power DIY electronics.
The leads are approximately 15cm long. One panel is supplied; it does not include a battery or charging controller.
Key Features
- The 60 × 75mm board suits compact project layouts.
- Attached 15cm leads provide direct wiring points.
- Epoxy coating covers the polycrystalline cell face.
- A 3V working rating helps match a suitable low-power load.
Details & Specs
| Panel rating | 0.6W |
|---|---|
| Working voltage | 3V |
| Working current | 0–200mA |
| Cell type | Polycrystalline silicon |
| Surface | Epoxy coating |
| Panel size | 60 × 75mm |
| Panel weight | Approximately 16g |
| Lead length | Approximately 15cm |
| Sales unit | One wired module |
Compatibility & Notes
Check voltage, current and lead polarity before connection. Battery charging requires a suitable charge-control circuit. Available output depends on sunlight, panel angle, temperature and load. Keep exposed leads insulated and support them at the board.
