0.2W 2V Mini Solar Panel for DIY Electronics - 10-Pack
0.2W 2V Mini Solar Panel for DIY Electronics - 10-Pack está agotado y se enviará tan pronto como vuelva a estar disponible.
Características
Características
0.2W 2V Mini Solar Panel for DIY Electronics - 10-Pack
Product Overview
This 2V mini solar panel is supplied as a 10-pack of individual 0.2W modules for low-power electronics experiments. Each purchase includes ten narrow panels for separate projects or matched classroom demonstrations. Polycrystalline cells sit under an epoxy surface, while rear connection pads marked with polarity provide the electrical interface for your project.
Each rectangular board measures 78.8 x 28.3mm and weighs approximately 7.5g, fitting small model housings and compact demonstration assemblies.
Details & Specs
Electrical ratings, dimensions and weight are per panel unless stated otherwise.
| Pack quantity | 10 individual panels per purchase |
|---|---|
| Rated power | 0.2W |
| Working voltage | 2V |
| Working current | 0-100mA |
| Cells | Polycrystalline silicon |
| Surface | Epoxy |
| Size | 78.8 x 28.3mm |
| Weight | Approximately 7.5g |
| Connection | Rear solder pads with polarity markings |
Key Features
- Ten individual panels per pack support multiple small projects with the same module specification.
- A 0.2W, 2V rating per panel provides a clear starting point for matching a low-power circuit.
- The narrow 78.8 x 28.3mm board fits slim model housings and compact demonstration assemblies.
- Rear solder pads with polarity markings identify the positive and negative connections for project assembly.
Best For
Use for educational solar demonstrations, small model projects and carefully matched low-power light or toy circuits. Compare the circuit's running and start-up requirements with the available 0.2W panel output before choosing the load.
The slim footprint is useful where a square module will not fit. Ten individual boards per pack let you prepare multiple small assemblies with the same panel specification.
Compatibility & Notes
Wire the marked positive and negative connections correctly, insulate exposed joints and provide support so cable movement does not pull on the pads. A soldered connection and any required control electronics are part of the project assembly.
Actual voltage and current change with light level and load. Battery projects require a charging circuit suitable for the battery chemistry; the panel is not a regulated power supply or a complete battery charger.
Package Contents
10 x 0.2W 2V mini solar panels with epoxy surfaces and rear solder pads. One cart quantity equals one 10-pack.
