Universal Solar Panel Pole Mount Kit | Adjustable Brackets for 5W-50W Panels

Bracket is a quality product. It is a little light on the hardware as in flat washers & lock washers. They engineering, material and tooling are outstanding. The edges on the bracelet as others have mentioned are a little sharp. I ran a file over the edges before pealing the protective cover off.I mounted an Amazon supplied 50 watt solar panel on a 9’ long 2” post in minutes.The bracket and the panel together have put an end to my driveway gate opener battery charging issues. Thanks to all the fine craftsmen that helped along the way.

It's a lot beefier than it looks in the product pictures. I had reservations about the method used to set and hold the desired angle. But once I had it in hand, those reservations went away. It has no problem holding the 50W panel I used. I would have liked some spring washers for the two bolts that hold the angle, but that's more for a warm fuzzy than an actual product deficiency. I had to use the provided clamps to hold the Callsun 50 Watt Solar Panel. The top clamp is hard to keep straight when you are also holding the solar panel. An additional slot/tongue on the top clamp would alleviate this. Or have another person help you. Or, mount the bar to the panel before attaching it to the bracket. I would by this again. And, its pieces will fit in a suitcase!

Held small solar panel for powering remote comm’s unit in the field

I am confused by this review section as many seem to be written regarding a pole mount. My review here is exclusively for the "Adjustable Solar Panel Mount Mounting Rack Bracket Set Rack Folding Tilt Legs, Boat, RV, Roof Off Grid (40.5 - inch Length)."The product above should work fine for mounting smaller to medium-size solar panels. For my 300-watt class panels that require a little over 39 inches between mounting holes, the main bracket arms were a little too short and could not be used, despite the claims in the marketing text. Even if the bracket arms managed to be 40.5 inches long, the closest mounting holes to the ends were well inside of that distance on both ends so there was no way to bolt them up without drilling new holes that would have left very little material left for structural integrity. The description should be revised to indicate only the distance easily covered by the bracket arms between mounting holes with no suggestion that they might cover more.

My second unit and easy to mount. Adjustable and solid. Meets all my needs.