고객사의 프로젝트에 동력을 제공하는 맞춤 제작 태양광 솔루션.

IoT 센서, CCTV 카메라 및 기상관측장비용 맞춤 제작 및 OEM 태양광 패널.

시제품 제작부터 양산까지 — 단 하나의 공급업체, 단 하나의 소통 창구.

7.8W 12V Solar Battery Charger Kit with Clips and Vehicle Plug

LinkSolar  |  SKU: SP-A00026-001
$3778 USD
세금 및 배송비는 결제 단계에서 계산됩니다.


주요 기능

  • 7.8W rated solar panel output.
  • 12V working output.
  • Cell type: Monocrystalline.

Product Overview

This 7.8W 12V solar battery charger kit pairs a 310 × 190mm monocrystalline panel with battery-clip, vehicle-plug and USB accessory leads. Its EVA-laminated, matte panel can be positioned near a suitably matched small battery installation.

The panel is intended to provide supplemental solar charging support. Select charging equipment appropriate to the battery and confirm each connection before use.

Panel with supplied battery and vehicle leads
Monocrystalline panel and mounting eyelets
Panel and connection accessories

Package Contents

One 7.8W solar panel, one battery-clip lead approximately 1.5m long, one vehicle-plug lead approximately 1.5m long and one USB accessory lead approximately 1m long. A battery and separate charge controller are not included.

Details & Specs

Maximum panel power 7.8W
Working voltage 12V
Working current 0–650mA
Cell type Monocrystalline
Construction EVA lamination with matte surface
Panel dimensions 310 × 190mm
Operating temperature 0–60°C
Package dimensions 330 × 205 × 30mm
Packaged weight Approximately 350g
Protection feature Reverse-current protection

Key Features

  • Battery clips and a vehicle plug offer alternative connection hardware.
  • Edge eyelets allow the panel to be secured on a suitable support.
  • A matte laminated surface and slim format support portable use.
  • Reverse-current protection helps limit backflow; it does not replace battery-specific charge control.
Panel front with vehicle connection lead
Rear panel connected to battery clips
Rear housing and short output lead

Compatibility & Notes

Check the battery chemistry, charge-voltage requirements, polarity and cable connections. Use an appropriate charge controller where required. The nominal 12V panel rating is not a guarantee of compatibility with every vehicle battery.

For a vehicle socket connection, confirm the socket circuit supports the intended charging arrangement. Verify USB accessory output and regulation before connecting electronics. Panel output and indicator brightness change with sunlight and load.

Keep electrical connections dry, secure the panel and avoid shading the cells. Phones, demonstration cables and other display props are not included.

Example USB accessory connection to a phone

Chat on WhatsApp