10W 12V Solar Panel with 3m DC5521 Cable and Mounting Clips

Product Overview

This 10W 12V solar panel combines a rectangular monocrystalline module with four corner eyelets and an approximately 3m DC5521 cable. It is suited to matched low-power lighting and DIY solar circuits where the panel and electronics need separate positions.

The 310 x 180mm panel uses EVA lamination. Two carabiners and four cable ties provide attachment options through the reinforced corners.

Key Features

• 10W rated power and a 12V operating voltage for matching to a suitable DC circuit.
• Four reinforced eyelets provide defined panel attachment points.
• An approximately 3m DC5521 lead gives flexibility in cable routing.
• Two carabiners and four ties are supplied for mounting arrangements.

Details & Specs

Package Contents

One solar panel with attached DC cable, two carabiners and four cable ties.

Compatibility & Notes

Match the load or charging controller to the panel's electrical range and check barrel-connector polarity before use. Battery charging requires suitable regulation and protection; a 12V panel rating alone does not confirm charging compatibility with a nominal 12V battery.

Place the panel in direct sunlight and prevent strain on the cable. Available power depends on sunlight, angle, shading, temperature and the connected system.