4-Port Outdoor IP67 PoE Extender - 100M / 1G
Product Overview
This 4-port outdoor PoE extender provides one compatible PoE input and four PoE outputs in a sealed metal enclosure. It creates a centralized outdoor connection point for cameras, wireless devices, sensors, and solar-powered monitoring equipment while keeping the connector layout visible and serviceable.
Choose a Network Speed
Two variants are available. The Gigabit model supports 10/100/1000 Mbps, while the Fast Ethernet model supports 10/100 Mbps. Select the version that matches the upstream switch or injector, cabling, and every connected endpoint. A faster extender does not increase the speed of a slower device or cable segment.
Port and Power Layout
Product labeling shows one BT 90 W PoE input and four PoE output ports, with a maximum 90 W output budget. That figure is a total equipment limit rather than 90 W per output. Account for cable loss and divide the available power across all connected devices.
| PoE Layout | 1 input, 4 outputs |
|---|---|
| Gigabit Variant | 10/100/1000 Mbps |
| Fast Ethernet Variant | 10/100 Mbps |
| Input Label | BT 90 W PoE |
| Maximum Output Label | 90 W total |
| Enclosure Marking | IP67 |
Installation Notes
Confirm the upstream PoE mode, total power budget, cable category, and endpoint requirements before connection. Mount the enclosure securely, keep the ports clean during assembly, and tighten every gland around a compatible cable. Unused openings should remain properly sealed for the intended environment.
Details & Specs
The front face provides four labeled RJ45 outputs, while the input side carries the incoming PoE connection. Status LEDs show power and link activity for practical troubleshooting. This unit extends and distributes a compatible PoE link; it does not supply power without an appropriate upstream source.
