Outdoor 2.5G / 10G PoE Injector - 90W, IP67

Product Overview

This 10G outdoor PoE injector adds power to one compatible Ethernet link through a sealed, single-output enclosure. Four current configurations combine either 2.5G or 10G networking with a 48–57V DC or 12–57V DC input range, helping buyers match the injector to the complete network and power architecture.

Speed and Input Selection

Select 2.5G or 10G according to the slowest component in the link, including the switch, injector, cable, connector, and powered device. Then choose the DC input range that matches the planned supply. The 48–57V and 12–57V versions are separate options and should not be treated as interchangeable.

PoE Output Details

The available models provide one data input and one PoE output with a maximum 90W output label. IEEE 802.3af, 802.3at, and 802.3bt modes are identified for the active PoE output. Actual usable power still depends on the selected input version, source capacity, cable loss, and connected-device demand.

Details & Specs

Deployment Notes

Verify polarity, source capacity, PoE mode, cable category, grounding approach, and endpoint requirements before installation. Keep the RJ45 connections clean, tighten the glands, and leave enough clearance to inspect the status indicators. The 90W figure is an equipment limit, not a guarantee that every input condition can deliver the full output.