200W Eight-Section Solar Blanket - N-Type 16BB
Product Overview
The 200W eight-section solar blanket unfolds into two rows of four solar sections and packs into a handled pouch for transport. Its folded size is 16.14 x 15.35 x 3.07in, while the open assembly measures 61.41 x 31.89 x 1.50in. At approximately 4kg, it provides a practical carrying format for temporary outdoor solar charging.
Folding Format & Cell Technology
N-type cells use a 16BB configuration and provide 25% cell efficiency. An ETFE surface sits over a layered assembly with EVA and PET materials. The eight-section construction gives you a broad collection area when open without requiring a single rigid panel to carry.
- Eight sections fold into a pouch with carrying handles.
- N-type 16BB cells form the solar collection surface.
- Edge loops provide attachment points during deployment.
- USB-C PD3.0 supports up to 45W for compatible devices.
- Two USB-A ports provide additional charging connections.
Details & Specs
| Rated panel power | 200W |
|---|---|
| Section layout | 8 sections; two rows of four |
| Cell technology | N-type; 16BB |
| Cell efficiency | 25% |
| Surface material | ETFE |
| Other layer materials | EVA and PET |
| Folded size | 16.14 x 15.35 x 3.07in |
| Unfolded size | 61.41 x 31.89 x 1.50in |
| Product weight | 8.82lb; approximately 4kg |
| USB-C | PD3.0; up to 45W |
| USB-A | Two ports; up to 18W |
| Panel surface protection | IP65 |
Charging & Packing Notes
USB output depends on available sunlight and the charging profile supported by your device and cable. The 200W panel rating is not a USB-port rating, and it does not guarantee continuous output or the sum of all port maximums simultaneously. For other charging connections, check connector polarity and the receiving equipment's permitted solar-input range before use.
Deploy every section in direct sunlight and keep shade off the cells. Output varies with sunlight, angle, temperature and connected equipment. The IP65 rating applies to the panel surface; keep electrical connectors dry. Disconnect devices before folding, follow the designed fold lines and avoid sharp bends through the cells. Pack the assembly dry and protect it from heavy pressure and impacts during transport.
