3.3W 5V Camera Solar Panel with 3m USB-C Lead
$2396 USDPreço unitário6W Shingled Camera Solar Panel, Micro-USB or USB-C
$4373 USDPreço unitário5W ETFE Camera Solar Panel with 3m Connector Options
$3703 USDPreço unitário4W Camera Solar Panel with 3m DC3.5 Lead
$3248 USDPreço unitário8W Camera Solar Panel with DC, USB-C or Micro-USB
$4510 USDPreço unitário3.5W Camera Solar Panel with 3m Connector Options
$2396 USDPreço unitário4W Camera Solar Panel with DC5521 to DC3.5 Adapter
$3362 USDPreço unitário5W 5V Solar Panel for Security Cameras - Mini-USB, 5m Cable
$3316 USDPreço unitárioSuporte universal para placa solar de 5W, montagem em parede/poste
$1599 USDPreço unitárioWooden Bird Feeder with Camera - 1080p Wi-Fi and Solar Charging
$12441 USDPreço unitário25W Solar 4G Router Kit - Wi-Fi 6, 18000mAh Battery
$16858 USDPreço unitário8W Solar Panel with Four 18650 Battery Slots - 3.7V or 5V
$8914 USDPreço unitárioMini placa solar de 25W com controlador MPPT integrado
$9560 USDPreço unitárioMini placa solar de 4W com saída DC de 5V/6V/9V/12V
$4290 USDPreço unitário
How to size solar power for a security camera
Start with measured average consumption, including standby, recording, night illumination and cellular transmission. Panel wattage and maximum DC output are different limits.
- Calculate daily energy: camera average watts × 24 h = Wh/day. One watt-hour means one watt used for one hour, as defined by the U.S. Energy Information Administration.
- Use worst-month peak sun hours: daily solar energy in kWh/m² equals peak sun hours at a reference irradiance of 1 kW/m² (NLR performance parameters). Use the resource at your installation, including seasonal shade.
- Estimate panel watts: daily Wh ÷ peak sun hours ÷ 0.86. The divisor allows for the 14% default system losses in the NLR PVWatts manual. This is a starting estimate; battery charging, conversion and site conditions can require more capacity.
- Size storage: daily Wh × days without sun = required usable battery Wh. Nominal 18650 pack Wh = cells × mAh × 3.7 V ÷ 1000; usable energy is lower.
Worked example: an event-triggered 4G camera averaging 1 W needs 1 × 24 = 24 Wh/day. At 3 peak sun hours, 24 ÷ 3 ÷ 0.86 ≈ 9.3 W: choose the 12 W box rather than the 4 W as the starting panel size. Three days require 24 × 3 = 72 Wh usable. Six 3,300 mAh cells hold 6 × 3,300 × 3.7 ÷ 1000 ≈ 73 Wh nominal, matching the 25 W page, but that page estimates only about 55 Wh usable. A full six-cell pack therefore falls short of three days at 1 W.
A continuous 4 W camera consumes 96 Wh/day and needs about 37.2 W of panel at the same sun resource, exceeding every power box here. See the camera solar power design page for system planning, and the small solar panel for camera guide for more load examples.
Solar panels and camera power parts in this collection
- 4 W solar power box: 5/6/9/12 V DC output, up to six parallel 18650 cells, IP66, included mounting bracket. Batteries not included.
- 8 W solar power box: 5/6/9/12 V DC output, six 18650 slots, IP66; no MPPT. Batteries not included.
- 12 W solar power box: 5/6/9/12 V DC output, up to six parallel 18650 cells, IP66 housing and included bracket. Batteries not included.
- 25 W MPPT solar power box: built-in MPPT, six 18650 slots, 5/6/9/12 V DC output and IP66 housing. Batteries not included.
- 8 W panel with battery holder: 200 × 200 mm panel, four 18650 slots, built-in charge controller, 3.7–4.2 V or 5 V output variants. Batteries not included.
- 25 W solar 4G router kit: separate panel, Wi-Fi 6, six 18650 cells totaling 18000mAh, WAN/LAN port and IP66 housing.
- Wooden bird-feeder camera: 1080p camera, 2.4 GHz Wi-Fi, 4 W panel and rechargeable 2000mAh battery. MicroSD card not included.
- Small wall/pole bracket: for 5–10 W panels, fixed 40° tilt, aluminum alloy and stainless steel hardware.
- Universal pole mount kit: 5–50 W panels, 50.8–114.3 mm poles, 172–540 mm mounting dimension and 0–90° tilt. Pole and panel not included.
- Adjustable pole bracket: 3 mm aluminum alloy, for 30–60 W panels and 2-inch poles. Pole and panel not included.
- Outdoor PoE extender: one PoE input/output, 100M/1G/2.5G/10G choices and IP67 enclosure; power mode depends on model.
- Outdoor PoE surge protector: 2.5G or 10G options, 48 V nominal, 57 V maximum continuous voltage and grounding connection.
- Outdoor AC/DC PoE injector: 30 W or 60 W options, 10/100/1000 Mbps and IP67 enclosure.
Check connections before powering your camera
- Voltage and current: match the camera input and peak demand to the selected output, including night operation.
- Plug and polarity: the four multi-voltage boxes use a 5.5 × 2.1 mm DC barrel output. Confirm polarity and any adapter; physical fit alone does not establish compatibility.
- Batteries and weather: use compatible, matched cells, close enclosure seals and keep connections dry.
- Mount fit: measure pole diameter and panel mounting dimensions, then position the panel clear of shade.
PoE for wired camera installations
For wired PoE cameras, Ethernet carries power and data: the injector adds power, the extender continues a compatible link, and the grounded surge protector adds protection. The injector accepts 100–240 V AC or 44–57 V DC, so it requires a power source at the head end. It is not a solar supply by itself; the 5–12 V boxes cannot directly provide its required DC input.
Guides by installation type
- Choosing a panel for a camera: the security camera solar panel buying guide.
- 4G or Wi-Fi camera: 4G vs Wi-Fi power design and the cellular camera power guide.
- Pole-mounted CCTV: pole-mount CCTV system design and 12V CCTV wiring.
- More than one camera on a site: powering several security cameras.
- Camera not charging: the troubleshooting checklist.
- Bird-feeder cameras: solar panels for bird-feeder cameras.
Camera power or something else?
For component builds, browse mini solar panels; for installation hardware, see solar panel pole mounts. Separate battery applications are covered in solar battery chargers. Remote monitoring points have their own pages: forest fire cameras and IoT sensors.
Frequently asked questions
How much solar power does a security camera need?
A camera averaging 1 W needs 24 Wh/day and about 9.3 W of panel at 3 peak sun hours with the stated loss allowance. A 12 W panel is the starting choice; verify usable storage and site conditions.
What size solar panel do I need for a 4G security camera?
About 12 W is the starting size for the 1 W average example. The 25 W product page estimates 11–18 hours without sun for continuous 3–5 W cameras, versus 1.5–4.5 days for event-triggered cameras averaging 0.5–1.5 W. These are product-page estimates, not runtime guarantees.
Can a small solar panel run a security camera at night or through cloudy days?
Yes, with sufficient charged battery storage; the battery supplies nighttime power. At 1 W average, three sunless days require 72 Wh usable, exceeding the 25 W box’s estimated 55 Wh usable pack.
Will this work with my camera brand?
Compatibility depends on voltage, required current, plug dimensions and polarity. Check the 5.5 × 2.1 mm barrel connection and any required adapter before ordering; no brand-wide fit is promised.
Do solar security cameras need Wi-Fi?
No; connectivity depends on the camera. A cellular camera uses mobile service, while a Wi-Fi camera can connect through the solar 4G router kit where cellular coverage and a suitable SIM plan are available. Read the no-Wi-Fi farm gate guide.
What size solar panel do I need for a trail camera?
About 12 W is the starting size if it averages 1 W with 3 peak sun hours; actual consumption and woodland shade determine the requirement. Follow the trail camera panel and battery sizing guide.
Can you build a custom solar power kit for a camera project?
Yes, we can scope custom builds around voltage, battery capacity, mounting and branding requirements. Share the camera load and installation conditions through custom mini solar panels.
Solar panels for bird feeder cameras and trail cameras
A solar powered bird feeder with camera typically charges an internal battery at 5V over USB-C or micro-USB, so a 3W to 6W 5V panel covers most feeders. For a smart bird feeder with camera, solar powered backup usually matters more than peak watts: the 3W panel with a 6000mAh battery backup, or the 8W panel with four 18650 slots, carries the camera through long cloudy stretches.
Trail cameras often differ: many take 6V or 12V rather than 5V. The multi-voltage mini panels with a 5V/6V/9V/12V DC output give you a 6V or 12 volt solar panel for trail camera setups in one unit. Match the plug too: round DC5521 barrels are common, and the 4W panel with a DC5521-to-DC3.5 adapter covers thinner jacks as well. A USB-C or micro-USB solar panel for camera charging fits models with standard ports.
Set the mounting angle toward the midday sun — a 30–45° tilt works for most yards. Keep a solar panel for bird feeder cameras slightly away from the perch, because birds sitting overhead drop seed hulls that shade the cells; wipe the glass when you refill the feeder.
Not sure which plug or voltage your camera needs? Email [email protected] or use the quote form and we'll match a panel to it.