Outdoor IP67 1-to-2 PoE Extender - 100M to 2.5G
Product Overview
This 1-to-2 PoE extender takes one compatible PoE network input and provides two output connections in a compact outdoor enclosure. It is intended for installations that need to place two network devices beyond a protected branching point, including cameras, access points, monitoring equipment, and solar-powered communications hardware.
Output Layout
The housing separates one input side from two output ports and includes cable glands, mounting ears, and visible link and power indicators. The two-output layout can reduce the need for an additional enclosure at the branch point. Available product views show the connector faces, mounting base, sealed rear housing, and assembled gland arrangement.
Speed and PoE Options
Choose 100M, 1000M, or 2500M to match the slowest component in the complete network path. Product labeling identifies passive 37–57 V and standards-based PoE configurations, with up to 120 W shown for applicable models. These ratings must not be treated as interchangeable across every variant.
Details & Specs
| Port Layout | 1 PoE input, 2 PoE outputs |
|---|---|
| Speed Choices | 100M, 1G, or 2.5G |
| Outdoor Rating | IP67 shown on the product material |
| Maximum Power Label | Up to 120 W on applicable versions |
Installation Notes
Confirm the selected model, upstream PoE budget, output-device demand, cable category, and pinout before wiring. Divide the available upstream power across both outputs and allow for cable loss. Mount the unit securely and tighten each gland around a compatible cable. This extender does not create additional upstream power; it distributes the compatible input available to the two connected devices. Leave access for indicator checks and future connector service.
