60W ETFE Foldable Solar Panel with USB-C, USB-A and DC

Product Overview

This 60W ETFE foldable solar panel opens into a four-section monocrystalline array with separate DC, USB-A and USB-C outputs. It is designed for portable daylight charging setups where a compact folded panel and a choice of connections are useful.

The gray panel unfolds to 853 × 392mm and folds to 392 × 214 × 30mm. Its net weight is approximately 1.6kg. Four carabiners, a 2m DC5521 cable and connector adapters are included, giving you the components to assemble a compatible charging connection without treating every device as interchangeable.

Key Features

• 60W monocrystalline array with approximately 23% cell conversion efficiency.
• ETFE laminated collecting surface with an IPX6 panel rating.
• 18V DC output rated up to 3.34A for a matched DC charging input.
• USB-A QC3.0 output and a separate USB-C output with defined voltage profiles.
• Four folding sections, corner eyelets and four carabiners for positioning.
• DC barrel adapters plus an Anderson/XT60 connection cable in the kit.

Details & Specs

Compatibility & Notes

For DC charging, check the receiving power station or controller accepts the panel output and the selected connector, including polarity. An adapter changes the physical connection; it does not change voltage or establish compatibility by itself. Use the correct barrel size or Anderson/XT60 connection for the receiving equipment.

For USB charging, match the device and cable to a supported output profile. The 60W figure is the panel rating, not a guaranteed output from each USB port. Available power is shared when loads are connected, and sunlight, temperature, shading and device demand affect the result. USB-A QC3.0 support does not imply every attached device will charge at its maximum rate.

Open all four sections and position the array without shadows across the cells. Fold at the joints without creasing a collecting section. IPX6 applies to the panel; keep output ports, adapters and connected devices dry and do not immerse the assembly. This charger has no internal storage battery, so a separate compatible battery system is required to retain energy for later use.

Package Contents

Includes one 60W folding panel, four carabiners, one approximately 2m DC5521 cable, one each of DC5525, DC35135 and DC7909 adapters, and one DC5521-to-Anderson/XT60 cable. Power station, battery and USB device cables are not included.