Outdoor IP67 1-to-2 PoE Extender - 100M to 2.5G
Outdoor IP67 1-to-2 PoE Extender - 100M to 2.5G - 100M ...は取り寄せ中で入荷次第発送します。
Product Overview
This 1-to-2 PoE extender takes one compatible PoE network input and provides two output connections in a compact outdoor enclosure. It is intended for installations that need to place two network devices beyond a protected branching point, including cameras, access points, monitoring equipment, and solar-powered communications hardware.
Output Layout
The housing separates one input side from two output ports and includes cable glands, mounting ears, and visible link and power indicators. The two-output layout can reduce the need for an additional enclosure at the branch point. Available product views show the connector faces, mounting base, sealed rear housing, and assembled gland arrangement.
Speed and PoE Options
Choose 100M, 1000M, or 2500M to match the slowest component in the complete network path. Product labeling identifies passive 37–57 V and standards-based PoE configurations, with up to 120 W shown for applicable models. These ratings must not be treated as interchangeable across every variant.
Details & Specs
| Port Layout | 1 PoE input, 2 PoE outputs |
|---|---|
| Speed Choices | 100M, 1G, or 2.5G |
| Outdoor Rating | IP67 shown on the product material |
| Maximum Power Label | Up to 120 W on applicable versions |
Installation Notes
Confirm the selected model, upstream PoE budget, output-device demand, cable category, and pinout before wiring. Divide the available upstream power across both outputs and allow for cable loss. Mount the unit securely and tighten each gland around a compatible cable. This extender does not create additional upstream power; it distributes the compatible input available to the two connected devices. Leave access for indicator checks and future connector service.
Buyer questions
Which speed should I choose?
100M, 1000M or 2500M — match the slowest component in the complete network path: upstream equipment, cabling and the two connected endpoints.
Passive or standards-based PoE?
Product labeling identifies passive 37–57 V and standards-based PoE configurations depending on the model, and the ratings must not be treated as interchangeable across variants. Confirm the selected model before wiring.
Does the 120 W figure apply to every unit?
No — up to 120 W is shown on applicable versions only. The extender does not create additional upstream power; it divides the compatible input available across the two outputs, with cable loss to allow for.
What is on the housing?
One input side separated from two output ports, cable glands, mounting ears, and visible link and power indicators, in a compact outdoor enclosure with an IP67 marking on the product material.
LinkSolar supplies solar accessories to B2B buyers; ships from China.
