10W 12V Solar Panel with 3m DC5521 Cable and Mounting Clips
10W 12V Solar Panel with 3m DC5521 Cable and Mounting Clips está agotado y se enviará tan pronto como vuelva a estar disponible.
Características
Características
10W 12V Solar Panel with 3m DC5521 Cable and Mounting Clips
Product Overview
This 10W 12V solar panel combines a rectangular monocrystalline module with four corner eyelets and an approximately 3m DC5521 cable. It is suited to matched low-power lighting and DIY solar circuits where the panel and electronics need separate positions.
The 310 x 180mm panel uses EVA lamination. Two carabiners and four cable ties provide attachment options through the reinforced corners.
Key Features
- 10W rated power and a 12V operating voltage for matching to a suitable DC circuit.
- Four reinforced eyelets provide defined panel attachment points.
- An approximately 3m DC5521 lead gives flexibility in cable routing.
- Two carabiners and four ties are supplied for mounting arrangements.
Details & Specs
| Rated power | 10W |
|---|---|
| Operating voltage | 12V |
| Operating current | 0-800mA |
| Short-circuit current | 850mA |
| Cells | Monocrystalline silicon |
| Construction | EVA lamination |
| Panel size | 310 x 180mm |
| Connector | DC5521 |
| Cable length | Approximately 3m |
| Package dimensions | 320 x 190 x 30mm |
Package Contents
One solar panel with attached DC cable, two carabiners and four cable ties.
Compatibility & Notes
Match the load or charging controller to the panel's electrical range and check barrel-connector polarity before use. Battery charging requires suitable regulation and protection; a 12V panel rating alone does not confirm charging compatibility with a nominal 12V battery.
Place the panel in direct sunlight and prevent strain on the cable. Available power depends on sunlight, angle, shading, temperature and the connected system.
