100W Cylindrical Solar Panel - SunPower Cells, 1060mm

Product Overview

This 100W cylindrical solar panel combines SunPower cells with a curved glass module form for solar lighting poles. The assembled module measures 1060mm high and 180mm in diameter. Its slim vertical profile helps integrate the solar generation surface into a pole-based installation where a separate overhead flat panel is not the preferred layout.

The product is a solar module for system integration. Plan the pole, lighting load, battery and charge-control equipment as a complete project rather than treating the module rating as a promise of lighting runtime.

Dimensions & Construction

Use the 1060 x 180mm module envelope to check available height and surrounding clearance. The 180mm figure describes the module diameter, not a guaranteed fit for a 180mm pole. The circular end-cap structure and curved cell surface should be considered together with the mounting method and cable route.

Key Features

• 100W rated power gives a clear starting point for sizing the solar generation component.
• SunPower cells provide the photovoltaic element within the curved glass module.
• Curved glass construction follows the rounded module surface for pole integration.
• 1060mm height and 180mm diameter simplify physical comparisons with an installation design.
• Cylindrical end-cap details help assess the mechanical arrangement before mounting.

Details & Specs

Application Examples

Cylindrical solar modules can be integrated into lighting poles for landscape and walkway installations. Poles and lighting fixtures are separate system components.

Lighting System Integration

For a solar street-light or landscape-lighting project, verify the available solar exposure, pole fit and mechanical support before ordering. Check the panel electrical specification against the selected controller and battery configuration. Do not assume that any controller or battery is compatible based on a 100W label alone.

Energy production depends on sunlight, shading, temperature and system conditions. Allow safe access for handling the glass module and protecting connections. Qualified installation is recommended for the mechanical mounting and electrical integration.