45W Four-Section Solar Charger - USB-C PD and USB-A

Product Overview

The 45W four-section solar charger combines monocrystalline cells with a folding format and three USB connections. Two USB-C ports and one USB-A port offer different output ratings, so you can choose the connection that matches your device rather than treating every socket as equivalent. The grey fabric-backed assembly folds into a smaller carrying format between uses.

USB Outputs & Key Features

The USB-C PD3.0 connection is rated at 25W, alongside a separate 15W USB-C output and an 18W USB-A QC3.0 output. These are individual port ratings, not a promise that every connected device will charge at those levels simultaneously.

• 45W rated panel power with monocrystalline cells.
• 25.4% cell efficiency and four folding sections.
• USB-C PD3.0 output rated at 25W.
• Separate 15W USB-C and 18W USB-A QC3.0 outputs.
• IP68-rated panel surface; USB ports must remain dry.

Details & Specs

Compare the folded dimensions with your carrying space and check your device's charging requirements before choosing a port. A suitable charging cable may need to be purchased separately.

Charging & Care Notes

Open all four sections in direct sunlight and avoid shading individual cells. Actual output depends on sunlight intensity, temperature, panel angle and the connected equipment. Check supported charging protocols and use an appropriate cable; a USB-C connector alone does not guarantee PD charging at the maximum port rating.

Keep the output module, cable ends and connected electronics dry. Disconnect devices before folding, avoid bending the cells themselves and protect the panel surfaces from sharp objects during storage. The panel-surface rating does not make the complete charging setup waterproof.