LinkSolar is a China-based B2B supplier of custom & OEM solar panels, solar cells and mounting hardware. This page is for equipment makers, integrators and resellers who need a solar panel bracket changed to fit their own panel, pole or product: holes drilled to a panel outline, a clamp sized to a pole, or a brand mark on the part.
Two ways to buy. Stock brackets, mounts and clamps are listed online and can be ordered from 1 piece. Anything changed to your design is quoted on your drawing and quantity. Quotes come back within 12 hours and the quote is free.
Start from a stock bracket
Most custom bracket orders do not start from a blank sheet. They start from a bracket that already exists and change the parts that touch your panel or your site. These are the families listed online today:
| Bracket family | Typical use | Listed examples |
|---|---|---|
| Pole mounts | Sensors, cameras and small panels on a post or at remote sites | Pole mount collection, adjustable pole mount bracket for 30–60 W panels |
| Tilt mounts | Setting an angle on an RV, a roof or a ground stand | Tilt mount collection |
| Strut channel clamps | Panels on 1-5/8 in. strut or Unistrut frames | clamp kit for strut channel, mid clamps and end clamps for Unistrut |
| Z brackets, L brackets, rail kits, roof hooks, mid clamps | RV, boat, metal, shingle and tile roofs | Solar panel bracket collection, black aluminum mid clamps |
Sizes and materials for each part are on its product page.
What can be changed on a bracket
The changes buyers ask for most often are small ones made on a standard bracket body. Each one is confirmed on your drawing before we quote.
- Hole pattern drilled to match your panel's mounting holes or frame outline.
- Clamp fit for the pole diameter you actually have on site.
- Brand mark printed on the bracket, so the mount ships as part of your product.
- A new part, when no stock body fits. This is the one change that can need its own tooling, so we look first at whether a smaller change to a stock part does the job.
How a custom bracket order runs
One real example: a North American sensor maker has reordered the same pole-mount kit across several years. The bracket body stayed standard; three things changed: holes drilled to their panel outline, their brand mark printed on the part, and one clamp revision. The full record, including what cost them money, is in the custom bracket case study.
Three lessons from that project apply to most bracket orders:
- Measure the interface first. When a clamp fails on site, the pole diameter range is the first thing to check, before anyone pays for a new design.
- A drilled part only fits the panel it was drilled for. If your panel size changes, the hole pattern changes with it, and brackets already drilled cannot be reused for the new panel.
- Order ahead of your season. Changed parts are made as a separate run, so a late order can push the shipment from sea freight to air freight.
Samples take 7–14 days and cost US$10–200 depending on the spec. Test one bracket on your real panel and pole before you order in volume. The quote is free; samples are not. Every order is checked against the confirmed specification before it ships, and orders ship from China.
What to send for a quote
| Send us | Why it matters |
|---|---|
| Panel drawing or outline: size, frame thickness, mounting hole positions | Sets the hole pattern and the bracket length |
| Where it mounts: pole diameter, strut size, or roof type | Sets the clamp and the fixing hardware |
| The stock bracket closest to what you need, if there is one | Starting from a stock body is usually the cheaper route |
| Changes you need: holes, clamp fit, branding | Each change is quoted separately |
| Quantity per order and how often you reorder | Custom orders are quoted on your drawing and quantity |
Common questions
Is there a minimum order?
Stock brackets can be ordered online from 1 piece. Custom brackets are quoted on your drawing and quantity.
Can you supply the solar panel as well as the bracket?
Yes, as a separate line on the same quote. Panels are manufactured to your drawing by partner production lines; see custom solar panels.
Where can I read more before I send a drawing?
The guide to custom solar bracket fittings covers fitting types and the drawing workflow; aluminum solar panel brackets, Unistrut solar panel brackets and Z bracket mounting cover the main bracket types.
All product and brand names are trademarks of their respective owners. LinkSolar is not affiliated with or endorsed by them.