Solar Panel Clamp Kit for 1-5/8 in. Strut Channel, 10-Piece
Product Overview
This solar panel clamp kit combines six mid clamps and four end clamps for securing a four-panel row to compatible 1-5/8-inch strut channels. The 10-piece set provides clamp positions for adjacent module edges and the two outside edges of the row.
The clamps fit 30 mm and 35 mm framed solar modules, equivalent to approximately 1.18-1.38 inches. Choose Black or Silver anodized aluminum clamp bodies, each paired with stainless steel hardware, channel nuts, and blue retainers.
Key Features
- Complete 10-piece layout: Six mid clamps and four end clamps support a four-panel side-by-side arrangement.
- 1-5/8-inch strut format: Channel nut assemblies fit compatible standard strut channels used in solar mounting structures.
- 30/35 mm frame fit: The clamp set supports two common framed-module thicknesses.
- Black or Silver finish: Choose the anodized finish that coordinates with the module frame and mounting hardware.
- Complete clamp assemblies: Each clamp includes its matching fastener, channel nut, and retainer.
Best For
This kit is suited to four framed solar modules installed side by side on compatible roof, RV, or ground-mount structures built with standard 1-5/8-inch strut channel.
Details & Specs
| Product type | Solar panel mid and end clamp kit |
| Package quantity | 10 complete clamp assemblies |
| Clamp quantities | 6 mid clamps, 4 end clamps |
| Color options | Black, Silver |
| Compatible panel frame sizes | 30 mm, 35 mm / approximately 1.18-1.38 in. |
| Compatible channel format | Standard 1-5/8 in. strut channel |
| Clamp material | Aluminum |
| Finish | Anodized |
| Hardware material | Stainless steel |
| Item dimensions | 4 x 3 x 3 in. (L x W x H) |
Compatibility & Notes
This clamp kit is not intended for 1-1/4-inch or 1-1/2-inch channels. Confirm the panel frame thickness and exact strut-channel profile before ordering, and follow the module and mounting-system manufacturer's fastening and torque requirements.
Package Contents
Each 10-piece kit contains 6 mid clamp assemblies and 4 end clamp assemblies in the selected color.
Buyer questions
Is the strut channel included?
No. The package contents list only the clamp assemblies, 6 mid and 4 end, in the selected color. The strut channel is not listed, so you supply it.
Will it fit a 32 mm or 40 mm module frame?
The listed fit is 30 mm and 35 mm frame thickness. Other thicknesses are not listed, so measure your frame first, and request a quote if you need advice on a different size.
Can I use it on 1-1/4 inch or 1-1/2 inch strut?
No. The kit is not intended for 1-1/4-inch or 1-1/2-inch channels. It is for standard 1-5/8-inch strut channel, so confirm your exact strut profile before ordering.
What tightening torque should I use?
No torque value is published. Follow the fastening and torque requirements of your module and mounting-system manufacturer.
Is there any difference between Black and Silver?
They are color options only: the clamp bodies are anodized aluminum in either finish, with the same stainless steel hardware, channel nuts and blue retainers.
LinkSolar supplies solar mounting hardware to B2B buyers — brackets and hardware are made in our own bracket factory and shipped from China.
