Outdoor IP67 PoE Extender - 1 In / 1 Out, 100M to 10G
Product Overview
This outdoor PoE extender provides a sealed 1-input/1-output connection point for extending Ethernet and Power over Ethernet between compatible network devices. The compact aluminum enclosure, mounting tabs, status indicators, and cable-gland layout are suited to outdoor camera, wireless bridge, monitoring, and solar-powered network installations where a protected inline connection is needed.
Speed Options
Select the network version that matches the complete link: 100M, 1000M, 2500M, or 10000M. Switches, injectors, cabling, connectors, and powered devices must all support the chosen data rate. The 1-in/1-out format keeps the network path simple while moving the connection point closer to the remote device.
Electrical and Network Details
| Port Layout | 1 PoE input, 1 PoE output |
|---|---|
| Speed Choices | 100M, 1G, 2.5G, or 10G |
| Enclosure Marking | IP67 |
| Power Options | Passive 37–57 V or standards-based PoE, depending on selected model |
| Maximum Power Label | Up to 120 W on applicable versions |
Power mode and capacity are model-specific. Confirm the voltage, pinout, PoE standard, cable category, and powered-device demand for the exact speed option before installation.
Installation and Use Notes
Mount the housing securely, route both network cables through the supplied glands, and tighten the seals around compatible cable diameters. Keep connector terminations clean and dry during assembly. This device extends an existing compatible PoE link; it does not replace the upstream injector or PoE switch. For 2.5G and 10G operation, use cabling and endpoint hardware rated for the intended speed. Plan enough service clearance to reopen the glands, inspect the RJ45 terminations, and read the indicator lights after the unit is mounted.
