50-Pack 52mm x 52mm Polycrystalline Solar Cells
Product Overview
These 52mm x 52mm polycrystalline solar cells are supplied as a 50-piece DIY pack for compatible small photovoltaic projects. Their square two-inch format is suited to prototypes, educational assemblies, custom layouts, and replacement experiments where individual bare cells are required.
What Is Included
- 50 polycrystalline solar cells measuring 52mm x 52mm.
- Tabbing wire for interconnecting cell contacts.
- One flux pen for the soldering process.
Glass, encapsulation film, backsheet, bus wire, framing, junction hardware, and a finished enclosure are not confirmed as included.
Size & Electrical Notes
| Cell Material | Polycrystalline silicon |
|---|---|
| Cell Size | 52mm x 52mm |
| Rated Voltage | 0.5V per cell |
| Power | 0.43W |
| Pack Quantity | 50 cells |
Handling Guidelines
The audited title and description contain different per-cell power figures, so no power rating is stated here. Test representative cells before finalizing a string design. Handle bare cells carefully, support them during soldering, and plan adequate spacing for tabs and bus connections. Final module output depends on the series/parallel layout, cell matching, light, temperature, encapsulation, and assembly quality. This component pack is not a finished weather-protected panel.
A 50-Cell DIY Pack with Soldering Supplies
The pack is set up for hands-on string work: 50 bare polycrystalline cells at 52mm x 52mm, tabbing wire for interconnecting the cell contacts, and one flux pen for the soldering process. It is aimed at prototypes, educational assemblies, custom layouts and replacement experiments where individual bare cells are required.
What surrounds the cells is up to the build: glass, encapsulation film, backsheet, bus wire, framing, junction hardware and a finished enclosure are not confirmed as included. Final module output depends on the series/parallel layout, cell matching, light, temperature, encapsulation and assembly quality — this is a component pack, not a finished weather-protected panel, and representative cells should be tested before the string design is finalized.
Buyer questions
What comes in the pack?
50 polycrystalline solar cells measuring 52mm x 52mm, tabbing wire for interconnecting the contacts, and one flux pen for soldering. Glass, encapsulation film, backsheet, bus wire, framing, junction hardware and a finished enclosure are not confirmed as included.
What are the electrical basics?
Polycrystalline silicon at 0.5V per cell in a two-inch square format. Test representative cells before finalizing a string design — final module output depends on the series/parallel layout, cell matching, light, temperature, encapsulation and assembly quality.
Is this a finished panel?
No. It is a bare component pack for DIY photovoltaic projects, not a finished weather-protected panel. Handle bare cells carefully, support them during soldering, and plan adequate spacing for tabs and bus connections.
LinkSolar supplies solar cells to B2B buyers; ships from China.
